Hang the outer one and make sure both glide freely. Hang the inside one first and slide it all the way toward the wall with the showerhead. Regardless, it is worth noting that rollers for the inside door face inside the shower enclosure rollers on the outside one face outward. Some rollers come separate from the tracks and some come already attached. Drill 3/16-inch holes, tap plastic wall anchors in, and attached the jamb with screws, sliding the door into place.ĭrill a ½-inch hole through the meeting point of the track and the vertical frame use a screw to secure the two.įollow the same steps used to attach the bottom track. Mark the positions of the screw holes and use an automatic pump to create divots. Slide the strike rail onto the second jamb and hold the rail together as you line up the door with the track. Set it on the threshold-the fit should be snug-and use a tape measure to check that it is centered (see Tips for Measuring below). Cut the track with a hacksaw and use a file to smooth the newly roughened edge. ![]() Measure it to meet the specification of the shower’s threshold.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |